|
Pro-Stone & Floor + S |
Technical specifications
PRO +
Description :
PRO + is a complex water, oil and dirt repellent formula. Based on our latest research in the field of nano-technologies, PRO + protects walls, frontages, marbles, satillo, natural stones and other construction materials against humidity stains, damage caused by frost, pollution, etc... Efficiency of the treatment is controlled by the Standard Spray Test (AATCC Test Method) and the oil-penetration test (Hydrocarbon Resistance Test _ AATCC Test Method). PRO + is also particularly indicated for high-density stones with small capillarity such as marbles, granite, etc... Also has good anti-graffiti properties. May be applied on wood
Usage :
PRO + enters deep in the stones and protects the microscopically small pores. Because the wall is water- and oil proof; water, oil and dirt can't accumulate. Mildew doesn't get a chance to develop. The protection is micro porous so that the wall can keep breathing and leaves water vapour trough.
Properties :
Application :
• PRO + can be applied with a low-pressure pump on all porous
surfaces without
special precautions for man and his environment.
• The application has to be done from down to high for an
inclined support, in two
consecutive layers with a low-pressure pump equipped with a spray gun,
wet on wet.
• No application by rain or frost.
Special properties:
• Offers a lasting protection against water, frost, UV rays and
pollution.
• It retards development of mosses and mildew.
• Improves the thermique isolation up to 30%
• Hygiene will be better in the building, because it will prevent
mildew and
moist stains to develop.
• Surfaces will get slower dirty which leads to lower maintenance
costs.
• PRO + isn't poisonous and respects the environment.
• It is easy to apply, without dilution on all surfaces.
• It is colour-and odourless; the original view and texture of
the material stays preserved.
• The Standard Spray Test and the oil-penetration test can be
procured at request.
Characteristics :
Liquid : transparent
Viscosity : lower than 100CTS at 20°C
Mass volume: 0,75gr/ml
Active materials: 5 % + ou- 0,5
Flash point: Open Cup: 56°C
Closed Cup: 50°C
Boiling point: 188°-196°C
Vapour permeability: 0% +/- 3%
While use: Non-toxique and non-odorant.
Strengthener: N/A
Doensn't deteriorate the window or the frame.
CSTC report: N/A
IRPA report: N/A
Preparation :
The product is ready for use.
Application :
• PRO + can be applied with a low-pressure pump on all porous
surfaces without special precautions for man and his environment.
• The application has to be done from down to high for a inclined
support, in two consecutive layers with a low-pressure pump equipped with a
spray gun, wet on wet.
• No application by rain or frost.
• Dry in 4 to 6h.
• Very effective after 7 days.
Precautions :
In case of projection on windows or frames immediately wipe out with a moist tissue. The temperature of the support has to be minimum 5° C.
Consumption :
Apply several layers until saturation of the support: +/- 0.2 to 1.5 liter/m²
PRO-STONE & FLOOR + S
Limitations :
No application by rain and frost.
Cleaning of equipment and stains :
With our solvent PRO-DIL.
Stocking :
In a dry, frost-free room. Maximum storage time: 1 year.
Conditioning :
5l, 25l, 200l, Cubitainer
1.000 l
Important
information :
Safety precautions:
This product is not dangerous if there is doubt about the use or
application consult MSDS.